The engine is the “heart” of the equipment, and the integrity of the accessories directly determines the operating efficiency and service life of the engine. Many people ignore accessory maintenance, leading to frequent failures and soaring maintenance costs. Today, we will share several sets of simple and easy-to-remember maintenance points that even beginners can easily follow.
I. Core Accessories: Focus on Maintenance Without Slacking Off
1. Oil Filter + Air Filter: Replace every 5,000-8,000 kilometers to avoid impurity clogging the oil circuit and wearing the cylinder. This is the most basic and crucial step.
2. Spark Plugs: Check and replace every 20,000-50,000 kilometers depending on the material. Aging spark plugs will cause difficulty in starting and increased fuel consumption; timely replacement can reduce engine load.
3. Belts: Regularly check the tightness, and replace immediately if there are cracks or aging to prevent breakage during operation, which will cause secondary damage to the engine.
II. Daily Maintenance: Details Determine Durability
Regularly check the oil level to keep it within the standard range, avoid dry friction due to lack of oil or increased burden due to excessive oil, and choose the appropriate type of oil.
Keep accessories clean, especially the air filter and fuel injector (the injector mentioned earlier), to avoid dust and oil accumulation affecting operation.
Avoid long-term high-load operation of the engine; idle and warm up first after starting to reduce accessory wear and extend service life.
III. Pitfall Reminder: Don’t Make These Mistakes
Ignore minor faults: If accessories have slight abnormal noise or leakage, investigate and troubleshoot in time to avoid small problems turning into major faults.
Mix accessories/inferior accessories: Be sure to use original factory or appropriate models of accessories. Inferior accessories are easy to damage the engine, which is not worth the gain.
Engine accessory maintenance does not require complex operations. By grasping the core points and doing a good job in daily inspections, you can effectively reduce faults and keep the equipment running stably. Save it and refer directly to it for the next maintenance!
